Sterling-scale XC880A Bedienungsanleitung PDF herunterladen (Seite 34)

XC880A OWNERS MANUAL

7. Communication

This chapter contains information about the serial communication ports present on

the XC880A. The standard unit is equipped with 3 separately configurable RS232 ports,

which the operator can setup to output data at baud rates up to 115Kbps (115200 bps).

The following will guide the operator through the setup and use of the serial

communication ports.

7.1 Output Formats

The XC880A will output data in one of four standard formats. To gain

access to the communication parameters, press the ‘SHIFT’ key followed by ‘F’

(F6). The operator will be prompted for the setup parameters for each port as

described below.

7.1.1 Printer Output

If this output is chosen, and the standard printer (290/295) is

selected, the scale will print a ticket in ASCII format on the selected port.

If one of the barcode printers is selected see section 7.4. The transmitted

data will vary depending on the current state of the XC880A as described

below. The XC880 will also support a number of thermal label printers to

create custom barcode labels (See Section 7.4).

TIME 8:14 AM

DATE 03/31/2005

STATION # 102 Not printed if station set to zero.

SCALE # 1 Printed in multi-scale systems only.

SERIAL # 3 Printed if serial no. is enabled.

GROSS WT 3.99 Lbs.

TARE WT 1.00 Lbs. Printed if tare weight is present.

NET WT 2.99 Lbs. Printed if tare weight is present.

APW 0.0200 Lbs. Printed if counting.

QUANTITY 150 Printed if counting.

PART NO. 123 Printed if memory file open.

DESCRIPTION TEST PART Printed if memory file open.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 54 55

Keine Kommentare

Sterling-scale XC880A Bedienungsanleitung Seite 34